Motorsports Village
http://motorsportsvillage.com/forum/

marks 385
http://motorsportsvillage.com/forum/viewtopic.php?f=9&t=6860
Page 1 of 1

Author:  spib [ Sun Dec 27, 2009 11:32 pm ]
Post subject:  marks 385

on my cowl hood I will probably paint 401k maybee 401k loan
anyways looks like she is done, will stay at machine shop untill around
march or april, still need a few lil parts, and pro system carb and
$750 for a day at the dyno
oh yes , need to get a glide and a brake and shifter also :shock:
385, my blazer should run, this will be all motor
lookin to go 10.90
should be 580-600 hp


Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Author:  us7race [ Mon Dec 28, 2009 6:03 am ]
Post subject:  Re: marks 385

Looks Good Mark!! \:D/ \:D/

Author:  WR169 [ Mon Dec 28, 2009 7:24 am ]
Post subject:  Re: marks 385

Looking Good Mark. That should give you what you need to get that 10.90. \:D/ \:D/ \:D/ \:D/

Author:  sommersracing [ Tue Dec 29, 2009 12:56 pm ]
Post subject:  Re: marks 385

Looks Great =D>

Author:  Beretta [ Tue Dec 29, 2009 5:31 pm ]
Post subject:  Re: marks 385

Looks good Mark but if that is a cast cam gear it won't last to long and I would change it now before
you drop it in...With a roller cam and good spring pressure along with small block RPM the cam gear will
start dropping teeth.....Not something you want going through your new motor ;-) ..

Author:  spib [ Tue Dec 29, 2009 6:04 pm ]
Post subject:  Re: marks 385

I will check with motor builder but I am sure that is not a cast cam gear

Author:  Beretta [ Tue Dec 29, 2009 8:04 pm ]
Post subject:  Re: marks 385

Here's what it will end up looking like..
Image

Author:  inVEGArating [ Fri Jan 01, 2010 10:02 am ]
Post subject:  Re: marks 385

Hey Mark , what head is that 220,227?

Author:  spib [ Fri Jan 01, 2010 10:44 am ]
Post subject:  Re: marks 385

210

Author:  inVEGArating [ Fri Jan 08, 2010 10:04 am ]
Post subject:  Re: marks 385

AFR makes some great heads you will be happy with them for sure,those shaft rockers looked like they were offset that is why I thought it was one of the bigger heads,I have the 227's and I love them!

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/