Motorsports Village
http://motorsportsvillage.com/forum/

my newest project
http://motorsportsvillage.com/forum/viewtopic.php?f=9&t=4398
Page 3 of 3

Author:  Avery [ Mon Nov 10, 2008 7:19 pm ]
Post subject: 

ive got a ford 9 inch for it. its 31 spline with a locker and 390 gear. i guess ill be trying to put it in. that was just the wimpy 7.5 s10 rear in it that had been welded up

Author:  WR169 [ Mon Nov 10, 2008 11:08 pm ]
Post subject: 

We have a couple of those also. =;

Author:  Avery [ Tue Mar 24, 2009 7:00 pm ]
Post subject:  Re: my newest project

got my fenderwell headers put on it. that let it breathe alot better. 2" primaries and 3 1/2 collector
Image
Image
Image
Image

Author:  Beretta [ Wed Mar 25, 2009 5:36 am ]
Post subject:  Re: my newest project

I would move that coil and Ign box....Going to be alot of heat there.....

Author:  Elkyman [ Wed Mar 25, 2009 8:06 am ]
Post subject:  Re: my newest project

Beretta wrote:
I would move that coil and Ign box....Going to be alot of heat there.....


I 2nd that idea, and put it on a panel with vib rubbers on both sides, it will help greatly. I would get them headers coated also for some underhood heat saving also ;-)
Looks good avery, good luck this year and have some fun with it.

John

Author:  Beretta [ Wed Mar 25, 2009 11:37 am ]
Post subject:  Re:

one,two,three!!!!!!!!!!Oh No!!!!!!It's one of them

Image

Author:  Avery [ Wed Mar 25, 2009 5:02 pm ]
Post subject:  Re: Re:

Beretta wrote:
one,two,three!!!!!!!!!!Oh No!!!!!!It's one of them

Image


whats wrong with it?

Author:  Avery [ Wed Mar 25, 2009 5:02 pm ]
Post subject:  Re: my newest project

thanks also guys

Author:  Avery [ Wed Mar 25, 2009 5:03 pm ]
Post subject:  Re: my newest project

Beretta wrote:
I would move that coil and Ign box....Going to be alot of heat there.....


ive got a brand new 7al2 im going to be putting on it. im going to put it all in the cab

Author:  Avery [ Sun Apr 26, 2009 4:31 pm ]
Post subject:  Re: my newest project

picked me up some more welds. they are the pro stars. couldnt pass the price up. 250 for them 3.5 front 10's for the back.
here they are
Image
Image
Image
Image

Author:  StrokerCamaro [ Sun Apr 26, 2009 7:19 pm ]
Post subject:  Re: my newest project

Nice wheels, you stole them.

Author:  Avery [ Sat May 23, 2009 2:27 pm ]
Post subject:  Re: my newest project

got my pro stars put on her.
Image
Image
Image

Author:  Coloradoracer [ Wed Jun 10, 2009 8:27 pm ]
Post subject:  Re: my newest project

Truck is lookin' sharp Avery!!!


Mark

Author:  jason snyder [ Fri Jul 17, 2009 11:49 pm ]
Post subject:  Re: Re:

Avery wrote:
Beretta wrote:
one,two,three!!!!!!!!!!Oh No!!!!!!It's one of them

Image


whats wrong with it?


think he's messin with you ! its a dreaded 3 circuit carb ;-)

Author:  Elkyman [ Thu Jul 30, 2009 12:52 pm ]
Post subject:  Re: my newest project

Don't take no zipper from these guys Avery, I ran 9.80's with a 3 circuit 1150 and now I am heading towards 8's =; \:D/ \:D/ \:D/, this will get those guys goin, ready? ;-)

If you other 2 circuit guys could figure out your combinatoins, you may go faster, Hahahahahahaaha
Bring it on fella's =; =; =; I'm feelin good today \:D/ \:D/

The Elkster :-$

Page 3 of 3 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/