Motorsports Village

This is my 52 Chevy, just bought it few weeks ago. It has a nova subframe the 7.5 rearend under it. The motor is just a 305 and 350 tranny, power steering power brakes. It needs completely wired, the interior needs new gauges needs bucket seats or a nice bench. Im putting a 355, freshen up the tranny small stall converter 308 gears and drive the thing till it wont drive any more!!!

_________________

Damn bubba are you back on them drugs again. Where and the hell did you find that at.. Look like duks of hazard truck.. LOL Got that rear end fix yet or are you gone to put that 540 in the truck now that would be cool........

_________________
DRAG-ON-LADY
1955 Chevy Chop Top 3 TIME S/P POINTS CHAMPTION
ET 6.49 60FT 1.37. 107.54 mph

I welded the housing back up, still need a new center section. Im starting to think that 540 is to much motor for the car. If only someone I knew had a dragster to put it in!!!!!!!!

_________________

Hey bring it on just call me and ill come and get it. LOL

_________________
DRAG-ON-LADY
1955 Chevy Chop Top 3 TIME S/P POINTS CHAMPTION
ET 6.49 60FT 1.37. 107.54 mph

WOW!!!!!! That looks like a great project ...Was it "hacked up" or was it put together some what nicely??? But that's goig to keep you busy for sure!!
Keep us updated on the progress as you go along and don't forget to take pictures as you go so you can look at them later

_________________

running E85
Best ET 8.07
Best MPH 170.71
Barry

It wasnt really hacked up but it could have been done a little better. I think he just got in a hurry, somethings will have to be redone. The tilt front end is done pretty good, the subframe is welded in nice and tight. The paint job is new, he sanded it down to primer in spots to make it look old then put clear over it. The wiring is going to take me forever to figure out. I will post more pics as I get into it, I love these old trucks.

_________________

Dayum, that thing would look "bitchin" with a 3 or 4 inch top chop! I kinda liked them trucks with all that glass around the back of the cab too.

That 308 gear would work great with a Turbo 700R4 with OD. I can see it now, 60 MPH at 1200 RPM or less and a top end of about 160!

Nice project. I think for the wiring I would make it easy, and get a painless universal harness, and take all the old stuff out..

thats a cool old truck that will be fun as hell to drive around

_________________
   




http://www.s10dragracer.com/

Mannnnn, this is the PERFECT SLEEPER Just add 3 fogger stages, and a plate system and you would kill em on the street

Nice looking piece there, and I know what you mean about wiring, I am re-doing my Elky now

John

_________________

Thanks To;
DART
Motor City Muscle
Induction-Solutions
Fuelab Fuel System
D & S Engines
My Wife & Family




R.i.p. Doug Cunningham, gone, not forgotten.

I just ordered a painless kit, after looking it will be much easier this way.

_________________

Hey if you need any help call me. That way you can allway blame me if somthing goes wrong LOL

_________________
DRAG-ON-LADY
1955 Chevy Chop Top 3 TIME S/P POINTS CHAMPTION
ET 6.49 60FT 1.37. 107.54 mph

ROTF, is that how you got your nickname Ken????

_________________

Thanks To;
DART
Motor City Muscle
Induction-Solutions
Fuelab Fuel System
D & S Engines
My Wife & Family




R.i.p. Doug Cunningham, gone, not forgotten.

No john I am one of those guys like ken, I say what is on my mine and I dont sugar coat nothing.. I and JT has been friends for a long long time, JT is one of those friends that every body wants and needs. And his wife has a nice a$$.... kenny

_________________
DRAG-ON-LADY
1955 Chevy Chop Top 3 TIME S/P POINTS CHAMPTION
ET 6.49 60FT 1.37. 107.54 mph

Kenny, you should know by now Im going to blame you no matter what!!! now.

Yes she does, bad thing is she knows it!!!

_________________