Author |
Message |
ProStreet83C10
|
Posted: Thu Apr 20, 2006 9:58 am |
|
Joined: Tue Apr 18, 2006 9:38 pm Posts: 716 Location: Mason City, Iowa
|
Does anyone know where i can get either a 4 wheel disc conversion kit for my truck or at least a front conversion kit, id like to go with baer or wilwood brakes, but they dont have any products for my truck on there. If anyone can help me out here i would be MORE than appreciated.
_________________  R/T: .194 60': 2.322 330: 6.379 1/8: 9.803 MPH: 71.37 1000: 12.781 1/4: 15.314 MPH: 88.79
|
|
 |
|
 |
radicalz
|
Posted: Thu Apr 20, 2006 2:47 pm |
|
Joined: Tue Apr 18, 2006 9:39 pm Posts: 239 Location: Kalamazoo MI
|
|
 |
|
 |
ProStreet83C10
|
Posted: Thu Apr 20, 2006 6:08 pm |
|
Joined: Tue Apr 18, 2006 9:38 pm Posts: 716 Location: Mason City, Iowa
|
ok awesome, i will check them out as soon as i get time
_________________  R/T: .194 60': 2.322 330: 6.379 1/8: 9.803 MPH: 71.37 1000: 12.781 1/4: 15.314 MPH: 88.79
|
|
 |
|
 |
Anonymous
|
Posted: Fri Apr 21, 2006 7:40 am |
|
|
i am going wiht the ssbrakes corp for my ocnversion on the nova will be ordering them very soon hopfully in the next two weeks
|
|
 |
|
 |
ProStreet83C10
|
Posted: Fri Apr 21, 2006 9:07 am |
|
Joined: Tue Apr 18, 2006 9:38 pm Posts: 716 Location: Mason City, Iowa
|
ssbrakes has the rear drum to disc conversion i am looking for and it also has slotted front discs, so i will probably beordering some stuff from them in the near future
_________________  R/T: .194 60': 2.322 330: 6.379 1/8: 9.803 MPH: 71.37 1000: 12.781 1/4: 15.314 MPH: 88.79
|
|
 |
|
 |
Anonymous
|
Posted: Fri Apr 21, 2006 12:11 pm |
|
|
well let us know how they bolt up if its real good fit all the parts are the and all the good stuff i might be ordering mine in a couple weeks so if i get mine ill let you know how the install goes
|
|
 |
|
 |
ProStreet83C10
|
Posted: Fri Apr 21, 2006 3:20 pm |
|
Joined: Tue Apr 18, 2006 9:38 pm Posts: 716 Location: Mason City, Iowa
|
i prolly wont get to mine until this winter. But i do plan on doing that rear bake conversion from there, and upgrading to the alum. caliper and venter rotors. As for the fron i am going to see if i can get an alum. caliper like the pro 10 or whatever it is without needing 17" plus wheels to clear.
_________________  R/T: .194 60': 2.322 330: 6.379 1/8: 9.803 MPH: 71.37 1000: 12.781 1/4: 15.314 MPH: 88.79
|
|
 |
|
 |
|