Motorsports Village
http://motorsportsvillage.com/forum/

CSR water pump motor
http://motorsportsvillage.com/forum/viewtopic.php?f=7&t=9465
Page 1 of 1

Author:  Beretta [ Thu Aug 09, 2012 8:39 pm ]
Post subject:  CSR water pump motor

Here is what happened to the motor after winning the 1st round last week ](*,) ..and put me on the trailer....picture of the back plate of the motor..
Image
Wire broke at the solder joint O:)
Image

Author:  Ken0069 [ Thu Aug 09, 2012 9:03 pm ]
Post subject:  Re: CSR water pump motor

Looks like the way those coils were mounted "could" have allowed vibrations to cause that break. :-k

After it's fixed, maybe a bead of RTV down the back side to give it some support? :-k

Author:  Beretta [ Fri Aug 10, 2012 5:02 am ]
Post subject:  Re: CSR water pump motor

Sounds like a good idea Ken. I am going to have it fixed and found a guy in PA that has fixed them before so it's going in the mail Saturday am..Then I will have a spare.. =;

Author:  gearhead1011 [ Fri Aug 10, 2012 6:51 am ]
Post subject:  Re: CSR water pump motor

Have it fixed? That looks like something you could do with a soldering iron.

Author:  Beretta [ Fri Aug 10, 2012 11:52 am ]
Post subject:  Re: CSR water pump motor

Chuck, I don't trust my soldering skills :-# ..

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/