Motorsports Village

Head Work
Page 1 of 1

Author:  oldtimer [ Tue Sep 25, 2012 7:51 pm ]
Post subject:  Head Work

My 522 needs reworked. Of course I would like to find a little more power. I am thinking about having the heads reworked a bit. They are Brodix BB2X. I dont really need the latest and greatest port job as I just bracket race but would like to find someone that would do a quality job for me. They are going to need new springs etc as these have quite a few passes on them. Any recommendations?

Author:  Beretta [ Thu Sep 27, 2012 1:14 pm ]
Post subject:  Re: Head Work

Dennis whey not give Nick at Smithburg racing a call..I never have any work done by him but from the posts and that ink in that magazine I would at least give him a call... =;

Author:  rick360 [ Thu Sep 27, 2012 1:44 pm ]
Post subject:  Re: Head Work

Yes, Nick is just over the state line in Nebraska. I haven't had any of his heads but the EMC stuff shows he understands how to make some TQ & HP.

Another that I have seen work from is Ron's Porting near St. Louis, MO. Not sure how much BBC stuff he does but his sbc work is really good.


Author:  oldtimer [ Fri Sep 28, 2012 5:13 am ]
Post subject:  Re: Head Work

Rick, thanks for the suggestions. I will give them both a call. There is just no one here close to home to work with.

Author:  SMITHBERG RACING [ Fri Sep 28, 2012 9:10 pm ]
Post subject:  Re: Head Work

Just saw this and thanks for the recommendations. Feel free to give me a ring to discuss what you are after.
Nick Smithberg

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group