Motorsports Village
http://motorsportsvillage.com/forum/

Unlimited Performance Products (www.up22.com)
http://motorsportsvillage.com/forum/viewtopic.php?f=4&t=7203
Page 1 of 2

Author:  Ken0069 [ Thu Apr 29, 2010 10:25 am ]
Post subject:  Unlimited Performance Products (www.up22.com)

Any of you guys ever use any fiberglass products from these people?

http://www.up22.com/

Author:  rick360 [ Thu Apr 29, 2010 11:40 am ]
Post subject:  Re: Unlimited Fiberglass Products (www.up22.com)

I used some Unlimited Fiberglass fenders on a Nova I had years ago. They fit pretty good, but the finish was not as good as a Harwood, fibers sticking out around the edges and that type of thing. But that was ~20yrs ago and things may have changed.

At the time, Harwood only had one piece front ends and I wanted to keep the original grille, headlights etc. Unlimited had separate pieces.

Rick

Author:  gearhead1011 [ Thu Apr 29, 2010 2:09 pm ]
Post subject:  Re: Unlimited Fiberglass Products (www.up22.com)

I had the Unlimited stuff on my Pinto and it had to be the roughest fiberglass I have ever seen. It needed a ton of bodywork before it could be painted. This was probably 20 years ago like Rick but it seems like I saw a post over on RJ a couple of years ago and seems like the quality hadn't improved.

Author:  Ken0069 [ Thu Apr 29, 2010 3:23 pm ]
Post subject:  Re: Unlimited Fiberglass Products (www.up22.com)

Thanks guys. You just confirmed what I already knew.

I ordered a scoop from them a week or so ago and it was delivered today. That's the worst piece of fiberglass work I've EVER seen! I think I could have made one that looked that good with a bush ax! O:) In fact, when I sent them an Email about it just a bit ago I called it "JUNK"! I'll bet a body shop would charge me over $100 just to get it ready for primer! As it is, I'll have to buy about $35 worth of stuff (Bondo, sand paper, spot putty and primer) to try to make it usable myself!

Unreal!

Author:  gearhead1011 [ Thu Apr 29, 2010 3:58 pm ]
Post subject:  Re: Unlimited Fiberglass Products (www.up22.com)

I wish you woulda asked before you ordered from them [-( . I bought the stuff for the Probe from Glasstek in Napierville, IL and his stuff is second to none IMO. The fit was very nice and it only needed a little sanding and some primer before paint. Of course it had to be trimmed to fit.

Author:  Beretta [ Thu Apr 29, 2010 6:59 pm ]
Post subject:  Re: Unlimited Fiberglass Products (www.up22.com)

VFN is also has very good stuff.....My back end O:) .....of my Beretta of course is VFN and that was because Glasteck didn't make it but my scoop is from them and like Chuck said a little sanding and primer and was ready for paint.... ;-)

Author:  traysvega [ Thu Apr 29, 2010 7:24 pm ]
Post subject:  Re: Unlimited Fiberglass Products (www.up22.com)

Yep ,,,My cowl hood 7 incher on the chevelle was from them and my body guy went crazy as it was rough as a corn cob.Took SEVERAL hours to just make flat and look right..after alot of work it did turn out nice though.Body man told me never again...lol =;

Author:  Ken0069 [ Wed May 05, 2010 9:44 am ]
Post subject:  Re: Unlimited Fiberglass Products (www.up22.com)

Well, I still haven't heard anything from these people on this POS "scoop" they sent me? I Emailed them to two different Email addresses they had listed on the same day I posted this thread and I haven't gotten "jack" back from them. So, I guess that means they just don't give a flip whether I was satisfied with their stuff or not.

Think I'll leave this "sticky" up for a while and let Google, MSN and other bots read it. Maybe that will help this complaint make it to the search engines so others will know how they do.

Author:  Ken0069 [ Tue May 18, 2010 3:25 pm ]
Post subject:  Re: Unlimited Fiberglass Products (www.up22.com)

Still no word from these people on this junk scoop? I guess they just don't care about their customers, sort of like they've got my money so screw me now. Hopefully Google, Yahoo and MSN bots that hang out on here will pick this thread up so others that might be looking to purchase something from them will see how they do. ](*,)

Author:  traysvega [ Tue May 18, 2010 4:29 pm ]
Post subject:  Re: Unlimited Fiberglass Products (www.up22.com)

Ken0069 wrote:
Still no word from these people on this junk scoop? I guess they just don't care about their customers, sort of like they've got my money so screw me now. Hopefully Google, Yahoo and MSN bots that hang out on here will pick this thread up so others that might be looking to purchase something from them will see how they do. ](*,)


Yeah its ashame.You would think they would want to produce a QUALITY product in order to INCREASE their business.I called awhile back to ask if their 6 inch cowl hood for a vega was a Cowl scoop added to a stock hood or was it a 1 piece mold.The lady replied"its a scoop added to a hood".I told her the last time I bought a hood with a scoop added to a hood it looked like crap and asked if the quailty had changed.She replied "nope its the same" and hung up on me. =; O:)

Author:  traysvega [ Tue May 18, 2010 4:42 pm ]
Post subject:  Re: Unlimited Fiberglass Products (www.up22.com)

Heres a few pics.Some are hard to see the blemishes but lots of air pockets,thin spots,deep uneven places,just over all a piece of crap... O:)
After lots of filler and lots of work it actaully looked pretty good but no one should have to do that much work on hood.They also told me when I purchased it it would be smooth and gel coated when shipped.. :- :-
I'll just link them.
http://i76.photobucket.com/albums/j40/t ... CF0434.jpg
http://i76.photobucket.com/albums/j40/t ... CF0433.jpg
http://i76.photobucket.com/albums/j40/t ... CF0431.jpg
http://i76.photobucket.com/albums/j40/t ... CF0430.jpg
http://i76.photobucket.com/albums/j40/t ... CF0432.jpg
http://i76.photobucket.com/albums/j40/t ... CF0428.jpg

Author:  spib [ Wed May 19, 2010 10:04 am ]
Post subject:  Re: Unlimited Fiberglass Products (www.up22.com)

Ken0069 wrote:
Still no word from these people on this junk scoop? I guess they just don't care about their customers, sort of like they've got my money so screw me now. Hopefully Google, Yahoo and MSN bots that hang out on here will pick this thread up so others that might be looking to purchase something from them will see how they do. ](*,)

ken that sucks that a company could put out crap like that, and then like you say once they got there money , the hell with you, sucks to see you treated that way or anyone treated like that
on rj and other sites I have heard the same and never have heard anyone say a positive thing abought Unlimited fiberglass

Author:  DCarr [ Sat Jun 12, 2010 3:13 pm ]
Post subject:  Re: Unlimited Performance Products (www.up22.com)

I wish I would've known you wer considering them before you placed your order. I bought a hood and scoop from them for my 64 ( back in 95 - 96 ) and the scoop was really nice, no problems with it all, the hood ... the exterior looked good but the bottom side looked like it was setting next to a wood chipper while they laid the resin on ... I spent at least 10 hrs. cleaning up the bottom making it look decent.

Not having learned enough ... I went back to them in 2000 and ordered a deck lid and front and rear bumpers. The front wasnt terrible, but the rear was wider ( taller ) on 1 side than the othr, the sides wrapped around the body and they stuck out like air vent. I spent days slicing and repositioning everything to get them to look decent.

The Deck lid was just terrible on both sides and for some reson after the sealer, primer and paint you were able to see the lines of the fiberglass mat through everything ... probably painted it 5 times before I just accepted it.

I will try my luck at making my own parts before I ever consider even looking through their catalog again

Author:  ADAMSVEGA [ Wed Sep 12, 2012 4:34 pm ]
Post subject:  Re: Unlimited Performance Products (www.up22.com)

dont like to trash on line but the list of people not happy with them is long and getting a problem fixed is useless . my fenders took 10hrs of fitting and were not bolt in as stated on the catalog .and were not ready to go either /

Author:  MONTEMAN427 [ Wed Jan 16, 2013 1:29 am ]
Post subject:  Re: Unlimited Performance Products (www.up22.com)

I have a set of doors, fenders, cowl hood, deck lid and front and rear bumpers on my 72 Monte from them! I have seen better quality stuff but not everyone makes stuff for first gen Montes...
I will post pics as soon as I figure out how to make em smaller..
Ken0069 wrote:
Any of you guys ever use any fiberglass products from these people?

http://www.up22.com/

Page 1 of 2 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/