Motorsports Village
http://motorsportsvillage.com/forum/

koh 4-25-12 video
http://motorsportsvillage.com/forum/viewtopic.php?f=11&t=9154
Page 1 of 1

Author:  themadreefer [ Fri Apr 27, 2012 5:39 am ]
Post subject:  koh 4-25-12 video

one of my passes from this past wednesday. video is shaking at top end of track, not because of car(i hope not).

Image

Author:  Ron Gusack [ Fri Apr 27, 2012 6:50 am ]
Post subject:  Re: koh 4-25-12 video

Cool run.
What was the ET?
In the water, did you shift from 1 to 2 or 2 to 3?
In the shut down area, what did you shift to?

Author:  Ken0069 [ Fri Apr 27, 2012 8:49 am ]
Post subject:  Re: koh 4-25-12 video

Do you normally run down the track @ xxx MPH with your helmet not strapped on? O:) [-( [-X

Yup, the vibration is probably from harmonics in the car. I expect most all of'em do that unless you got some really good dampers mounting the camera.

Author:  Beretta [ Fri Apr 27, 2012 10:01 am ]
Post subject:  Re: koh 4-25-12 video

Ok looks good and sounds good but on the lines of what Ken said get a pair of gloves also =; =; =; ...You may never need them to be on but you will be glad you had them on...... \:D/

Author:  themadreefer [ Fri Apr 27, 2012 11:54 am ]
Post subject:  Re: koh 4-25-12 video

good eye there ken.i really need a new helmet, the strap does not function correctly. i promise you it is on my list to replace.i do have a pair of gloves i keep in car.
just something about gloves i do not like, even at the hose i am guilty of not wearing. i am a very safety conscious person.

planning on machining an aluminum mount for camera as the plastic one is a little flimsy.

was a 9.85 at 136.12(motor only)

2-3 shift only for burnout, never 1-2. second gear at top of end of track

its an 8970 timing box, for the nos

let see, i think i responded to everything.

appreciate it guys

Author:  Elkyman [ Sun Apr 29, 2012 6:19 am ]
Post subject:  Re: koh 4-25-12 video

I am right there with Ken and Barry on the helmet and gloves part, WE can never be too safe with these cars, and with racing gas and nitrous that goes x2 on the articles of clothing bigtime in this world. ;-)

Not to pick on you at all, but I have witnessed many guys not being tight in there cars!!!! O:) That just blows my mind that these people just don't care about there family at all! Sorry, but when that car hits the wall, your gonna be so brused up from them belts being loose and the chin strap, heck, what's the point of even wearing the helmet if you hit the wall as well, as that helmet is going for a ride when you impact anything!!!! I'm done =; Just looking out for your safety...

Camaro looks to be a fun ride and effortless to drive, Good job on it =D>

Author:  WR169 [ Sun Apr 29, 2012 10:43 am ]
Post subject:  Re: koh 4-25-12 video

Great video!! Nice and smooth.

Author:  themadreefer [ Sun Apr 29, 2012 2:35 pm ]
Post subject:  Re: koh 4-25-12 video

Elkyman wrote:
I am right there with Ken and Barry on the helmet and gloves part, WE can never be too safe with these cars, and with racing gas and nitrous that goes x2 on the articles of clothing bigtime in this world. ;-)

Not to pick on you at all, but I have witnessed many guys not being tight in there cars!!!! O:) That just blows my mind that these people just don't care about there family at all! Sorry, but when that car hits the wall, your gonna be so brused up from them belts being loose and the chin strap, heck, what's the point of even wearing the helmet if you hit the wall as well, as that helmet is going for a ride when you impact anything!!!! I'm done =; Just looking out for your safety...

Camaro looks to be a fun ride and effortless to drive, Good job on it =D>


trust me, i hear you. working in the industrial sector were safety is always top priority, i understand the importance of our ppe. even at home i am always a big proponent of ppe.
guess i was somewhat complacent with my safety gear in car. i am always looking for ways to improve safety for myself and also for the driver.

car drives like a cadillac since the installation of strut front end.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/