Motorsports Village
http://motorsportsvillage.com/forum/

Wheelie pic.
http://motorsportsvillage.com/forum/viewtopic.php?f=11&t=8344
Page 1 of 1

Author:  jmech [ Mon Jun 13, 2011 5:39 pm ]
Post subject:  Wheelie pic.

Ran 9.50 at 140mph, 1.30 60'
Image
I get to test a customers car this weekend. I built the 598ci engine for him and he's buisy farming so he said take it for the weekend and get it tuned.
Image

Author:  Beretta [ Mon Jun 13, 2011 7:04 pm ]
Post subject:  Re: Wheelie pic.

How about some spec's on that 598 =; .....I would think it would be over 1000 HP so 7 sec run should not be to hard :-k
What do you think it will run???

Author:  jmech [ Tue Jun 14, 2011 6:36 am ]
Post subject:  Re: Wheelie pic.

I built the 598 last fall so i don't remember exactly everything. Its a dart big m, eagle 4.5 stroke, 14-1, dart cnc heads, 7/4 swap roller, dart intake, 1150 gas dominator, jeff johnson billet pan, titan pump, TnD shaft rockers. It also has two stages of nitrous, edelbrock progressive and msd 7531 ign. T/S 1.80 glide and a tight converter that i think will be to tight, we'll see. It should run low 8's and into the 7's on the spray. The converter stalls at 3900 and was built for nitrous so i really don't know what it will run without the nitrous. It might be a turd.

Author:  BarryW [ Fri Jun 24, 2011 11:39 am ]
Post subject:  Re: Wheelie pic.

Soooo... did you ever run the 598?

Author:  jmech [ Fri Jun 24, 2011 1:00 pm ]
Post subject:  Re: Wheelie pic.

Yes i did. I had to use my old 1150 Dominator because his carb had a cracked bowl. Not what we were hoping for but we only made one real pass without the nitrous. Here is a video. http://www.youtube.com/watch?v=0TJMT5_A7XY

Author:  BarryW [ Fri Jun 24, 2011 9:18 pm ]
Post subject:  Re: Wheelie pic.

Hey, that's not bad for a shakedown session! You can tell it's begging for the spray! =; That's a NICE car. Great video, too. Keep us posted! \:D/

Author:  Scrapmetal [ Mon Jul 11, 2011 10:56 am ]
Post subject:  Re: Wheelie pic.

sweet

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/